English
Hardfacing materials – Flux cored wires Featured Image
  • Hardfacing materials – Flux cored wires

RX®ww 6170-O

Short Description:

Hardfacing materials – Flux cored wires

Flux cored wire for self-shielded metal arc hardfacing

●  The undiluted deposit contains dense and uniform distribution of primary chromium carbides and eutectic carbides of the M7C3 type. The surface appearance is typical for this type of hardface, with a family of stress-relief cracks

●  High chromium cast iron for hardfacing components subject to extremely severe abrasive wear and moderate impact

●  The deposit is suitable for hardfacing components subject to extremely severe abrasive wear and moderate impact


Product Detail

Product Tags

RX®ww 6170-O DESCRIPTION

specification EN14700
clas.code T Z Fe15
RX®ww 6150-O (2)
RX®ww 6150-O (1)
typical All-Weld metal analysis
C Si Mn Cr Other Fe
3.0-5.4 0-2 0-2 25-30 0.6 Bal
RX®ww 6150-O (3)
RX®ww 6150-O (4)
typical All-weld metal mechanical properties
hardness (3-layer deposit) 58-62HRC
general characteristics
microstructure M7C3
machinability grinding only
oxyacetylene cutting cannot be flame out
deposit thickness 2 to 6 mm maximum in 1 layers
shielding gas -
RX®ww 6150-O (5)
operating conditions
diameter(mm) current(A) voltage(V) stick-out(mm)
range optimum range optimum range optimum
2.4 250-450 350 26-35 28 25-50 40
2.8 250-450 400 26-35 30 25-50 40
3.2 300-550 500 28-35 30 25-50 30
welding positions flat
packaging
diameter（mm） 2.4 2.8 3.2
standard packaging coil/drum coil/drum coil/drum
weight 50kg /250kg 50kg /250kg 50kg /250kg

Other packaging and other diameters: please consult us

  • Previous:
  • Next:
    • Write your message here and send it to us
    Hit enter to search or ESC to close